| 2462 | 2 | Black | Brick, Modified Facet 3 x 3 |
| 3004 | 1 | Black | Brick 1 x 2 |
| 3039 | 1 | Black | Slope 45 2 x 2 |
| 3701 | 2 | Black | Technic, Brick 1 x 4 with Holes |
| 4871 | 1 | Black | Slope, Inverted 45 4 x 2 Double |
| 2456 | 1 | Blue | Brick 2 x 6 |
| 3007 | 1 | Blue | Brick 2 x 8 |
| 30014 | 2 | Dark Gray | Arm Holder Brick 1 x 2 with 2 Horizontal Fingers |
| 3039 | 2 | Dark Gray | Slope 45 2 x 2 |
| 3298 | 1 | Dark Gray | Slope 33 3 x 2 |
| 3622 | 2 | Dark Gray | Brick 1 x 3 |
| 4287 | 2 | Dark Gray | Slope, Inverted 33 3 x 1 |
| 6232 | 1 | Dark Gray | Brick, Modified 2 x 2 with Pin and Axle Hole |
| sp021 | 1 | Unknown | Minifig |
| sp032 | 1 | Unknown | Minifig |
| 4459 | 1 | Black | Technic, Pin with Friction Ridges Lengthwise |
| 2420 | 2 | Black | Plate 2 x 2 Corner |
| 2444 | 1 | Black | Plate, Modified 2 x 2 with Hole |
| 3021 | 2 | Black | Plate 2 x 3 |
| 3023 | 1 | Black | Plate 1 x 2 |
| 3032 | 1 | Black | Plate 4 x 6 |
| 3176 | 1 | Black | Plate, Modified 3 x 2 with Hole |
| 3475b | 4 | Black | Engine, Smooth Small, 1 x 2 Side Plate (With Axle Holders) |
| 4032 | 5 | Black | Plate, Round 2 x 2 with Axle Hole |
| 4081b | 4 | Black | Plate, Modified 1 x 1 with Clip Light - Type 2 (thick ring) |
| 2419 | 1 | Blue | Wedge, Plate 3 x 6 Cut Corners |
| 3020 | 2 | Blue | Plate 2 x 4 |
| 3021 | 1 | Blue | Plate 2 x 3 |
| 3022 | 1 | Blue | Plate 2 x 2 |
| 3710 | 2 | Blue | Plate 1 x 4 |
| 3794 | 1 | Blue | Plate, Modified 1 x 2 with 1 Stud (Jumper) |
| 3795 | 1 | Blue | Plate 2 x 6 |
| 4282 | 1 | Blue | Plate 2 x 16 |
| 30195 | 1 | Dark Gray | Plate, Modified 2 x 6 with 4 x 8 Half Saucer |
| 3022 | 1 | Dark Gray | Plate 2 x 2 |
| 4590 | 3 | Dark Gray | Plate, Modified 1 x 4 Offset |
| 4073 | 4 | Trans-Neon Green | Plate, Round 1 x 1 Straight Side |
| 2555 | 4 | Black | Tile, Modified 1 x 1 with Clip |
| 3068bpx7 | 2 | Black | Tile 2 x 2 with Insectoid Logo in Triangle Pattern |
| 3069bpx17 | 2 | Black | Tile 1 x 2 with Copper and Silver Elliptical Display Pattern |
| 2412b | 2 | Trans-Neon Green | Tile, Modified 1 x 2 Grille with Bottom Groove / Lip |
| 4859 | 1 | Blue | Wedge, Plate 3 x 4 without Stud Notches |
| 2607 | 2 | Black | Magnet Holder 2 x 3 |
| 3959 | 2 | Black | Minifig, Utensil Space Gun / Torch |
| 6048 | 2 | Black | Arm Piece with Pin, 2 Fingers |
| 73092 | 2 | Black | Magnet Cylindrical |
| 4599 | 2 | Blue | Tap 1 x 1 |
| 4856 | 1 | Blue | Wedge 6 x 4 Inverted |
| 30211 | 4 | Dark Gray | Support Leg Small (Insectoids) |
| 412 | 4 | Dark Gray | Arm Piece Turned with 2 and 3 Fingers |
| 6069 | 3 | Dark Gray | Wedge 4 x 4 Triple without Stud Notches |
| 30231pb01 | 2 | Trans-Dark Blue | Wing Insectoid Small with Arm Hinge and Circuitry Pattern Right (Print on Top, Tip at Right, Logo at Back Edge) |
| 30231pb02 | 2 | Trans-Dark Blue | Wing Insectoid Small with Arm Hinge and Circuitry Pattern Left (Print on Top, Tip at Left, Logo at Back Edge) |
| 2569 | 2 | Trans-Neon Green | Antenna Whip 8H |
| 30213 | 2 | Trans-Neon Green | Rock 2 x 2 Crystal 3 Point |
| 4589 | 2 | Trans-Neon Green | Cone 1 x 1 without Top Groove |