| 4286 | 2 | Blue | Slope 33 3 x 1 |
| 4286 | 1 | Yellow | Slope 33 3 x 1 |
| 50746 | 1 | Trans-Dark Blue | Slope Brick 31 1 x 1 x 2/3 roof tile,bnsf,cheese |
| 30602 | 1 | Trans-Black | Slope, Curved 2 x 2 Lip, No Studs |
| 50746 | 1 | Trans-Black | Slope Brick 31 1 x 1 x 2/3 roof tile,bnsf,cheese |
| 50746 | 1 | Trans-Yellow | Slope Brick 31 1 x 1 x 2/3 roof tile,bnsf,cheese |
| 3673 | 1 | Light Bluish Gray | Technic, Pin without Friction Ridges Lengthwise |
| 2444 | 1 | Blue | Plate, Modified 2 x 2 with Hole |
| 2450 | 4 | Blue | Wedge, Plate 3 x 3 Cut Corner |
| 3020 | 1 | Blue | Plate 2 x 4 |
| 3021 | 1 | Blue | Plate 2 x 3 |
| 3022 | 4 | Blue | Plate 2 x 2 |
| 3023 | 1 | Blue | Plate 1 x 2 |
| 3710 | 2 | Blue | Plate 1 x 4 |
| 3794 | 4 | Blue | Plate, Modified 1 x 2 with 1 Stud (Jumper) |
| 3023 | 2 | Yellow | Plate 1 x 2 |
| 3024 | 1 | Yellow | Plate 1 x 1 |
| 3710 | 1 | Yellow | Plate 1 x 4 |
| 3794 | 3 | Yellow | Plate, Modified 1 x 2 with 1 Stud (Jumper) |
| 6019 | 2 | Yellow | Plate, Modified 1 x 1 with Clip Horizontal |
| 4073 | 2 | Trans-Neon Orange | Plate, Round 1 x 1 Straight Side |
| 2420 | 2 | Light Bluish Gray | Plate 2 x 2 Corner |
| 3020 | 1 | Light Bluish Gray | Plate 2 x 4 |
| 3710 | 2 | Light Bluish Gray | Plate 1 x 4 |
| 4073 | 2 | Light Bluish Gray | Plate, Round 1 x 1 Straight Side |
| 4081b | 2 | Light Bluish Gray | Plate, Modified 1 x 1 with Clip Light - Type 2 (thick ring) |
| 4488 | 1 | Light Bluish Gray | Plate, Modified 2 x 2 with Wheel Holder |
| 49668 | 2 | Dark Bluish Gray | Plate, Modified 1 x 1 with Tooth |
| 3069b | 2 | Yellow | Tile 1 x 2 with Groove |
| 41769 | 1 | Yellow | Wedge, Plate 4 x 2 Right |
| 41770 | 1 | Yellow | Wedge, Plate 4 x 2 Left |
| 4617 | 1 | Black | Propeller 3 Blade 5.5 Diameter |
| 47675 | 1 | Blue | Container, X-Pod Top Cap 9 x 9 x 1 1/3 |
| 47676 | 1 | Blue | Container, X-Pod Bottom Cap 9 x 9 x 1 |
| 30374 | 2 | Yellow | Bar 4L Lightsaber Blade |
| 47674 | 1 | Trans-Yellow | Container, X-Pod Barrel Section 10 x 10 x 3 1/3 |
| 30027b | 1 | Light Bluish Gray | Wheel 8mm D. x 9mm (for slicks), hole notched for wheels holder pin |