| 2458 | 1 | Black | Brick, Modified 1 x 2 with Pin |
| 2465 | 2 | Black | Brick 1 x 16 |
| 3004 | 3 | Black | Brick 1 x 2 |
| 4070 | 4 | Black | Brick, Modified 1 x 1 with Headlight |
| 4595 | 2 | Black | Brick, Modified 1 x 2 x 2/3 with Studs on Sides |
| 2434 | 1 | Red | Brick, Modified 2 x 4 x 2 with Studs on Sides |
| 2458 | 1 | Red | Brick, Modified 1 x 2 with Pin |
| 3002 | 1 | Red | Brick 2 x 3 |
| 3004 | 2 | Red | Brick 1 x 2 |
| 3039 | 4 | Red | Slope 45 2 x 2 |
| 3039p05 | 1 | Red | Slope 45 2 x 2 with Black Grille Pattern |
| 3039p68 | 2 | Red | Slope 45 2 x 2 with MTron Logo Pattern |
| 3045 | 2 | Red | Slope 45 2 x 2 Double Convex |
| 3298p68 | 1 | Red | Slope 33 3 x 2 with MTron Logo Pattern |
| 3665 | 4 | Red | Slope, Inverted 45 2 x 1 |
| 3700 | 1 | Red | Technic, Brick 1 x 2 with Hole |
| 3747b | 2 | Red | Slope, Inverted 33 3 x 2 with Connections between Studs |
| 4730 | 5 | Red | Brick, Modified 2 x 2 with Pin and No Axle Hole |
| 4854 | 1 | Red | Slope, Inverted 45 4 x 4 Double |
| 4871 | 1 | Red | Slope, Inverted 45 4 x 2 Double |
| 4595 | 4 | Light Gray | Brick, Modified 1 x 2 x 2/3 with Studs on Sides |
| 4588 | 1 | Trans-Neon Green | Brick, Round 1 x 1 with Fins |
| sp033 | 3 | Unknown | Minifig |
| 2476a | 1 | Black | Plate 2 x 2 with Pin Type 1 |
| 3020 | 3 | Black | Plate 2 x 4 |
| 3022 | 6 | Black | Plate 2 x 2 |
| 3023 | 5 | Black | Plate 1 x 2 |
| 3024 | 2 | Black | Plate 1 x 1 |
| 3034 | 8 | Black | Plate 2 x 8 |
| 3315 | 1 | Black | Hinge Plate 2 x 4 - Male (Digger Bucket Holder) |
| 3597 | 1 | Black | Hinge Plate 2 x 4 - Female (Digger Bucket Holder) |
| 3839b | 1 | Black | Plate, Modified 1 x 2 with Handles - Type 2 (flat ends, low attachment) |
| 4032 | 4 | Black | Plate, Round 2 x 2 with Axle Hole |
| 4085c | 4 | Black | Plate, Modified 1 x 1 with Clip Vertical - Type 3 (thick U clip) |
| 4229 | 2 | Black | Engine, Strakes, 2 x 2 Thin Top Plate |
| 4590 | 1 | Black | Plate, Modified 1 x 4 Offset |
| 4623 | 4 | Black | Plate, Modified 1 x 2 with Arm Up (Horizontal Arm Length 6mm) |
| 2419 | 4 | Red | Wedge, Plate 3 x 6 Cut Corners |
| 2450 | 2 | Red | Wedge, Plate 3 x 3 Cut Corner |
| 2452 | 1 | Red | Hinge Plate 1 x 2 with 3 Fingers On Side |
| 3020 | 1 | Red | Plate 2 x 4 |
| 3021 | 1 | Red | Plate 2 x 3 |
| 3022 | 1 | Red | Plate 2 x 2 |
| 3023 | 9 | Red | Plate 1 x 2 |
| 3024 | 2 | Red | Plate 1 x 1 |
| 3031 | 1 | Red | Plate 4 x 4 |
| 3035 | 1 | Red | Plate 4 x 8 |
| 3666 | 6 | Red | Plate 1 x 6 |
| 3794 | 3 | Red | Plate, Modified 1 x 2 with 1 Stud (Jumper) |
| 3795 | 1 | Red | Plate 2 x 6 |
| 3832 | 1 | Red | Plate 2 x 10 |
| 4073 | 2 | Red | Plate, Round 1 x 1 Straight Side |
| 4081b | 2 | Red | Plate, Modified 1 x 1 with Clip Light - Type 2 (thick ring) |
| 4275b | 1 | Red | Hinge Plate 1 x 2 with 3 Fingers and Hollow Studs |
| 4276b | 1 | Red | Hinge Plate 1 x 2 with 2 Fingers and Hollow Studs |
| 4315 | 3 | Red | Hinge Vehicle Roof Holder 1 x 4 |
| 2540 | 2 | Light Gray | Plate, Modified 1 x 2 with Handle on Side - Type 1 (free ends) |
| 3022 | 1 | Light Gray | Plate 2 x 2 |
| 4073 | 4 | Trans-Neon Green | Plate, Round 1 x 1 Straight Side |
| 2412b | 2 | Black | Tile, Modified 1 x 2 Grille with Bottom Groove / Lip |
| 2432 | 2 | Black | Tile, Modified 1 x 2 with Handle |
| 3069b | 1 | Black | Tile 1 x 2 with Groove |
| 4531 | 1 | Black | Hinge Tile 1 x 2 1/2 with 2 Fingers on Top |
| 2412b | 1 | Red | Tile, Modified 1 x 2 Grille with Bottom Groove / Lip |
| 3068b | 1 | Red | Tile 2 x 2 with Groove |
| 3068bp68 | 2 | Red | Tile 2 x 2 with MTron Logo Pattern |
| 3069b | 2 | Red | Tile 1 x 2 with Groove |
| 3069bp68 | 2 | White | Tile 1 x 2 with Red and Yellow Controls Pattern |
| 3070bp06 | 1 | White | Tile 1 x 1 with Red and Black Buttons Pattern |
| 3070bpc2 | 1 | White | Tile 1 x 1 with Computer Display Pattern |
| 3933 | 2 | Black | Wedge, Plate 8 x 4 Wing Left |
| 3934 | 2 | Black | Wedge, Plate 8 x 4 Wing Right |
| 4475 | 1 | Black | Wedge, Plate 8 x 8 with 4 x 4 Cutout |
| 4859 | 1 | Black | Wedge, Plate 3 x 4 without Stud Notches |
| 4475 | 1 | Red | Wedge, Plate 8 x 8 with 4 x 4 Cutout |
| 4859 | 1 | Red | Wedge, Plate 3 x 4 without Stud Notches |
| 4859 | 1 | Light Gray | Wedge, Plate 3 x 4 without Stud Notches |
| 2340 | 2 | Black | Tail 4 x 1 x 3 |
| 2433 | 1 | Black | Hinge Bar with 3 Fingers and End Stud (Control Lever) |
| 2516 | 1 | Black | Minifig, Utensil Chainsaw Body |
| 2593 | 4 | Black | Wheel Hard Plastic Medium (35mm D. x 31mm) |
| 2609 | 3 | Black | Magnet Holder Tile 2 x 2 (Undetermined Type) |
| 298c05 | 2 | Black | Lever Small Base with Light Bluish Gray Lever |
| 3479 | 1 | Black | Tail 4 x 2 x 2 |
| 3937 | 5 | Black | Hinge Brick 1 x 2 Base |
| 3938 | 1 | Black | Hinge Brick 1 x 2 Top Plate Thin |
| 3962b | 2 | Black | Minifig, Utensil Radio with Extended Handle |
| 4589 | 3 | Black | Cone 1 x 1 without Top Groove |
| 4735 | 2 | Black | Bar 1 x 3 with Clip and Stud Receptacle (Robot Arm) |
| 73092 | 6 | Black | Magnet Cylindrical |
| 73590c01a | 2 | Black | Hose, Flexible 8.5L with Tabless Ends (Ends same color as Tube) |
| 2336p68 | 1 | Red | Cockpit Space Nose with MTron Logo Pattern |
| 2340 | 2 | Red | Tail 4 x 1 x 3 |
| 2607 | 3 | Red | Magnet Holder 2 x 3 |
| 3937 | 1 | Red | Hinge Brick 1 x 2 Base |
| 3938 | 5 | Red | Hinge Brick 1 x 2 Top Plate Thin |
| 4345a | 2 | Red | Container, Box 2 x 2 x 2 - Solid Studs |
| 4855 | 1 | Red | Wedge 4 x 4 Triple Inverted |
| 2582p68 | 2 | Light Gray | Hinge Panel 2 x 4 x 3 1/3 with MTron Pattern |
| 4346p68 | 2 | Light Gray | Container, Box 2 x 2 x 2 Door with Slot and MTron Pattern |
| 2507 | 1 | Trans-Neon Green | Windscreen 10 x 4 x 2 1/3 Canopy |
| 2569 | 2 | Trans-Neon Green | Antenna Whip 8H |
| 4589 | 8 | Trans-Neon Green | Cone 1 x 1 without Top Groove |
| 4740 | 7 | Trans-Neon Green | Dish 2 x 2 Inverted (Radar) |