| 32062 | 9 | Black | Technic, Axle 2 Notched |
| 3705 | 5 | Black | Technic, Axle 4 |
| 3706 | 1 | Black | Technic, Axle 6 |
| 3707 | 1 | Black | Technic, Axle 8 |
| 3708 | 2 | Black | Technic, Axle 12 |
| 4519 | 6 | Black | Technic, Axle 3 |
| 32017 | 2 | Black | Technic, Liftarm 1 x 5 Thin |
| 6632 | 2 | Black | Technic, Liftarm 1 x 3 Thin |
| 32017 | 2 | Light Gray | Technic, Liftarm 1 x 5 Thin |
| 6629 | 2 | Light Gray | Technic, Liftarm 1 x 9 Bent (6 - 4) Thick |
| 2730 | 4 | Black | Technic, Brick 1 x 10 with Holes |
| 3700 | 2 | Black | Technic, Brick 1 x 2 with Hole |
| 3702 | 4 | Black | Technic, Brick 1 x 8 with Holes |
| 3713 | 2 | Light Gray | Technic Bush |
| 4265b | 10 | Light Gray | Technic Bush 1/2 Toothed Type II |
| 32013 | 5 | Light Gray | Technic, Axle and Pin Connector Angled #1 |
| 32014 | 3 | Light Gray | Technic, Axle and Pin Connector Angled #6 - 90 degrees |
| 32015 | 6 | Light Gray | Technic, Axle and Pin Connector Angled #5 - 112.5 degrees |
| 32016 | 2 | Light Gray | Technic, Axle and Pin Connector Angled #3 - 157.5 degrees |
| 32039 | 2 | Light Gray | Technic, Axle Connector with Axle Hole |
| 6536 | 2 | Light Gray | Technic, Axle and Pin Connector Perpendicular |
| 6538b | 1 | Light Gray | Technic, Axle Connector (Ridged with x hole x orientation) |
| 3648a | 1 | Light Gray | Technic Gear 24 Tooth |
| 4716 | 1 | Light Gray | Technic, Gear Worm Screw |
| 2780 | 10 | Black | Technic Pin with Friction and Slots |
| 6558 | 4 | Black | Technic, Pin Long with Friction Ridges Lengthwise |
| 75535 | 1 | Black | Technic, Pin Connector Round (Pin Joiner Round) |
| 3749 | 3 | Light Gray | Technic, Axle Pin without Friction Ridges Lengthwise |
| 32002 | 6 | Dark Gray | Technic, Pin 3/4 |
| 2419 | 1 | Black | Wedge, Plate 3 x 6 Cut Corners |
| 2452 | 2 | Black | Hinge Plate 1 x 2 with 3 Fingers On Side |
| 32001 | 1 | Black | Technic, Plate 2 x 6 with 5 Holes |
| 3709b | 1 | Black | Technic, Plate 2 x 4 with 3 Holes |
| 3710 | 2 | Black | Plate 1 x 4 |
| 3794 | 2 | Black | Plate, Modified 1 x 2 with 1 Stud (Jumper) |
| 4276b | 2 | Black | Hinge Plate 1 x 2 with 2 Fingers and Hollow Studs |
| 3023 | 2 | Yellow | Plate 1 x 2 |
| 3710 | 1 | Yellow | Plate 1 x 4 |
| 4032 | 1 | Yellow | Plate, Round 2 x 2 with Axle Hole |
| 4073 | 2 | Trans-Yellow | Plate, Round 1 x 1 Straight Side |
| 3068b | 1 | Black | Tile 2 x 2 with Groove |
| tech026 | 1 | Unknown | Technic Figure Blue Legs, White Top with Zipper & Shoulder Harness Pattern, Blue Arms, White Helmet (set 8222) |
| 2340 | 1 | Black | Tail 4 x 1 x 3 |
| 2952 | 4 | Black | Propeller 2 Blade 9 Diameter |
| 3483 | 3 | Black | Tire Offset Tread |
| 3942c | 1 | Black | Cone 2 x 2 x 2 - Completely Open Stud |
| 6588 | 1 | Black | Technic, Gearbox 2 x 4 x 3 1/3 |
| 75c12 | 2 | Dark Gray | Hose, Rigid 3mm D. 12L / 9.6cm |
| 2717 | 1 | Yellow | Technic Seat 3 x 2 Base |
| 3482 | 3 | Yellow | Wheel with Split Axle hole |
| 4589 | 2 | Yellow | Cone 1 x 1 without Top Groove |