Onderdeel | ID | Aantal | Kleur | Omschrijving |
---|
2420 | 2 | Blauw | Plate 2 x 2 Corner |
2458 | 1 | Blauw | Brick Special 1 x 2 with Pin |
2555 | 5 | Zwart | Tile Special 1 x 1 with Clip and Straight Tips |
2569 | 4 | Trans-Neongroen | Antenna Whip 8H |
2569 | 1 | Zwart | Antenna Whip 8H |
2607 | 1 | Donkergrijs | Magnet Holder 2 x 3 |
30014 | 2 | Donkergrijs | Arm Holder Brick 1 x 2 with 2 Horizontal Fingers |
30035 | 2 | Zwart | Equipment Space Scanner |
30208 | 2 | Trans-Neongroen | Dome Hemisphere 4 x 4 Multifaceted |
30209 | 2 | Donkergrijs | Plate Special 1 x 2 with 4 x 4 disk at 90 degrees |
3021 | 1 | Zwart | Plate 2 x 3 |
30211 | 4 | Donkergrijs | Support Leg Small [Insectoids] |
30213 | 1 | Trans-Neongroen | Rock 2 x 2 Crystal 3 Point |
3022 | 2 | Blauw | Plate 2 x 2 |
3023 | 1 | Blauw | Plate 1 x 2 |
3023 | 1 | Donkergrijs | Plate 1 x 2 |
3023 | 1 | Zwart | Plate 1 x 2 |
30230pr0001 | 1 | Transparant Donkerblauw | Wing Insectoid Large with Arm Hinge and Circuitry Print Left (Print on Top, Tip on Left, Logo at Back Edge) |
30230pr0002 | 1 | Transparant Donkerblauw | Wing Insectoid Large with Arm Hinge and Circuitry Print Right (Print on Top, Tip on Right, Logo at Back Edge) |
3024 | 1 | Blauw | Plate 1 x 1 |
3039 | 2 | Zwart | Slope 45° 2 x 2 |
3040b | 2 | Zwart | Slope 45° 2 x 1 with Bottom Pin |
3040bpr0012 | 2 | Donkergrijs | Slope 45° 2 x 1 with Bottom pin, with Black Crosshairs and Green Insectoid Print |
3068bpr0353 | 1 | Zwart | Tile 2 x 2 with Insectoid Logo in Triangle Print |
3475b | 2 | Zwart | Engine - Smooth, Small 1 x 2 Side Plate [With Axle Holders] |
3623 | 2 | Blauw | Plate 1 x 3 |
3665 | 2 | Blauw | Slope Inverted 45° 2 x 1 |
3710 | 6 | Blauw | Plate 1 x 4 |
3794a | 2 | Blauw | Plate Special 1 x 2 with 1 Stud without Groove (Jumper) |
3795 | 1 | Zwart | Plate 2 x 6 |
3832 | 1 | Zwart | Plate 2 x 10 |
3937 | 2 | Zwart | Hinge Brick 1 x 2 Base |
3938 | 2 | Blauw | Hinge Brick 1 x 2 Top Plate Thin |
4081b | 2 | Blauw | Plate Special 1 x 1 with Clip Light [Thick Ring] |
412 | 2 | Donkergrijs | Arm Piece 90° Turn [2 / 3 Fingers] |
4229 | 1 | Zwart | Engine, Strakes, 2 x 2 Thin Top Plate |
4286 | 4 | Blauw | Slope 33° 3 x 1 |
4287a | 4 | Zwart | Slope Inverted 34° 3 x 1 without Internal Stopper |
4589 | 4 | Trans-Neongroen | Cone 1 x 1 [No Top Groove] |
4595 | 1 | Zwart | Brick Special 1 x 2 x 2/3 with Studs on Sides |
4740 | 3 | Trans-Neongroen | Dish 2 x 2 Inverted [Radar] |
4746 | 1 | Zwart | Tail 4 x 2 x 2, Rocket |
4859 | 1 | Blauw | Wedge Plate 3 x 4 without Stud Notches |
71603 | 1 | Donkergrijs | Light and Sound Unit, Insectoid Tail 4 x 20 x 3 |
73092 | 1 | Zwart | Magnet Cylindrical |
73590c02a | 2 | Zwart | Flexible Hose 8.5L with Tabbed Ends (Ends same color as Tube) |
insectmask | 1 | Zwart | Play Gear, Mask, Hard Plastic, Insectoids |
stickerupn0038 | 1 | [Geen Kleur/Alle Kleuren] | Sticker Sheet for Sets 2964-1, 2965-1, 5316-1, 6817-1, 6837-1, 6903-1, 6905-1, 6907-1, 6909-1, 6919-1, 6969-1, 6977-1 |
2420 | 2 | Blauw | Plate 2 x 2 Corner |
2458 | 1 | Blauw | Brick Special 1 x 2 with Pin |
2555 | 5 | Zwart | Tile Special 1 x 1 with Clip and Straight Tips |
2569 | 4 | Trans-Neongroen | Antenna Whip 8H |
2569 | 1 | Zwart | Antenna Whip 8H |
2607 | 1 | Donkergrijs | Magnet Holder 2 x 3 |
30014 | 2 | Donkergrijs | Arm Holder Brick 1 x 2 with 2 Horizontal Fingers |
30035 | 2 | Zwart | Equipment Space Scanner |
30208 | 2 | Trans-Neongroen | Dome Hemisphere 4 x 4 Multifaceted |
30209 | 2 | Donkergrijs | Plate Special 1 x 2 with 4 x 4 disk at 90 degrees |
3021 | 1 | Zwart | Plate 2 x 3 |
30211 | 4 | Donkergrijs | Support Leg Small [Insectoids] |
30213 | 1 | Trans-Neongroen | Rock 2 x 2 Crystal 3 Point |
3022 | 2 | Blauw | Plate 2 x 2 |
3023 | 1 | Blauw | Plate 1 x 2 |
3023 | 1 | Donkergrijs | Plate 1 x 2 |
3023 | 1 | Zwart | Plate 1 x 2 |
30230pr0001 | 1 | Transparant Donkerblauw | Wing Insectoid Large with Arm Hinge and Circuitry Print Left (Print on Top, Tip on Left, Logo at Back Edge) |
30230pr0002 | 1 | Transparant Donkerblauw | Wing Insectoid Large with Arm Hinge and Circuitry Print Right (Print on Top, Tip on Right, Logo at Back Edge) |
3024 | 1 | Blauw | Plate 1 x 1 |
3039 | 2 | Zwart | Slope 45° 2 x 2 |
3040b | 2 | Zwart | Slope 45° 2 x 1 with Bottom Pin |
3040bpr0012 | 2 | Donkergrijs | Slope 45° 2 x 1 with Bottom pin, with Black Crosshairs and Green Insectoid Print |
3068bpr0353 | 1 | Zwart | Tile 2 x 2 with Insectoid Logo in Triangle Print |
3475b | 2 | Zwart | Engine - Smooth, Small 1 x 2 Side Plate [With Axle Holders] |
3623 | 2 | Blauw | Plate 1 x 3 |
3665 | 2 | Blauw | Slope Inverted 45° 2 x 1 |
3710 | 6 | Blauw | Plate 1 x 4 |
3794a | 2 | Blauw | Plate Special 1 x 2 with 1 Stud without Groove (Jumper) |
3795 | 1 | Zwart | Plate 2 x 6 |
3832 | 1 | Zwart | Plate 2 x 10 |
3937 | 2 | Zwart | Hinge Brick 1 x 2 Base |
3938 | 2 | Blauw | Hinge Brick 1 x 2 Top Plate Thin |
4081b | 2 | Blauw | Plate Special 1 x 1 with Clip Light [Thick Ring] |
412 | 2 | Donkergrijs | Arm Piece 90° Turn [2 / 3 Fingers] |
4229 | 1 | Zwart | Engine, Strakes, 2 x 2 Thin Top Plate |
4286 | 4 | Blauw | Slope 33° 3 x 1 |
4287a | 4 | Zwart | Slope Inverted 34° 3 x 1 without Internal Stopper |
4589 | 4 | Trans-Neongroen | Cone 1 x 1 [No Top Groove] |
4595 | 1 | Zwart | Brick Special 1 x 2 x 2/3 with Studs on Sides |
4740 | 3 | Trans-Neongroen | Dish 2 x 2 Inverted [Radar] |
4746 | 1 | Zwart | Tail 4 x 2 x 2, Rocket |
4859 | 1 | Blauw | Wedge Plate 3 x 4 without Stud Notches |
71603 | 1 | Donkergrijs | Light and Sound Unit, Insectoid Tail 4 x 20 x 3 |
73092 | 1 | Zwart | Magnet Cylindrical |
73590c02a | 2 | Zwart | Flexible Hose 8.5L with Tabbed Ends (Ends same color as Tube) |
insectmask | 1 | Zwart | Play Gear, Mask, Hard Plastic, Insectoids |
stickerupn0038 | 1 | [Geen Kleur/Alle Kleuren] | Sticker Sheet for Sets 2964-1, 2965-1, 5316-1, 6817-1, 6837-1, 6903-1, 6905-1, 6907-1, 6909-1, 6919-1, 6969-1, 6977-1 |